Features
At first glance, the Tremarella lead looks identical on both ends. But if you look closely
you will find that one end of the lead is rounded and the other end is slightly more pointed.
The main line is first pulled through the pointed end of the lead and comes out at the rounded end
end out again. (This gives the lead better flight characteristics when ejected.)
Material made of rubber that adapts to the diameter of the cord.
Tip: The size of the rubber stopper must be chosen in consideration of what tackle is to be stopped (glasses, lead, sbiros, ect.).
Never choose a rubber stopper that is too small if the line guide channel of the chosen tackle is larger.
Use and technique for fishing with the Tremarello lead
After throwing in, the rig should be done just before hitting the water surface
be slowed down by slightly stopping the main line. This prevents the system from becoming entangled
and falls “stretched” into the water.
After throwing in, the assembly is allowed to sink to the bottom. The tail points directly and
straight to the insertion point of the assembly. Now the rod should be at an angle of about 45° to the water
be held high. (On a clock, the hour hand would point to „half past ten.“)
Once the assembly has reached the bottom, the Tremarella technique is used. In doing so
the rod only vibrates from the wrist and the line by very slow
Turning the reel caught up.
Since the fish is to be fished close to the bottom here, care should be taken to ensure that the assembly
not rising too far from the bottom. For this reason, hauling in the assembly should be briefly interrupted
so that contact with the ground is re-established.
you will find that one end of the lead is rounded and the other end is slightly more pointed.
The main line is first pulled through the pointed end of the lead and comes out at the rounded end
end out again. (This gives the lead better flight characteristics when ejected.)
Material made of rubber that adapts to the diameter of the cord.
Tip: The size of the rubber stopper must be chosen in consideration of what tackle is to be stopped (glasses, lead, sbiros, ect.).
Never choose a rubber stopper that is too small if the line guide channel of the chosen tackle is larger.
Use and technique for fishing with the Tremarello lead
After throwing in, the rig should be done just before hitting the water surface
be slowed down by slightly stopping the main line. This prevents the system from becoming entangled
and falls “stretched” into the water.
After throwing in, the assembly is allowed to sink to the bottom. The tail points directly and
straight to the insertion point of the assembly. Now the rod should be at an angle of about 45° to the water
be held high. (On a clock, the hour hand would point to „half past ten.“)
Once the assembly has reached the bottom, the Tremarella technique is used. In doing so
the rod only vibrates from the wrist and the line by very slow
Turning the reel caught up.
Since the fish is to be fished close to the bottom here, care should be taken to ensure that the assembly
not rising too far from the bottom. For this reason, hauling in the assembly should be briefly interrupted
so that contact with the ground is re-established.
products number (s) of the manufacturer
T6560009








Rezensionen
Es gibt noch keine Rezensionen.